VE Mapper, WEB edition

This program is ©2004 Perry Harrington

Input dyno data

Below you can enter your dyno data.
The format should be 1 entry per line, with a space separating the RPM value from the torque value.
You must input at least 8 values.

Some sample data is already input.

AFR values
You can "push" the VE values at the corresponding locations

MAPRPMRPM 0RPM 1RPM 2RPM 3RPM 4RPM 5RPM 6RPM 7
MAP 7
MAP 6
MAP 5
MAP 4
MAP 3
MAP 2
MAP 1
MAP 0

Fudge factors (leave alone, set all to 1, or put in your own values)

MAP 0 MAP 1 MAP 2 MAP 3 MAP 4 MAP 5 MAP 6 MAP 7

MAP bin values (defaults are for NA)

MAP 0 MAP 1 MAP 2 MAP 3 MAP 4 MAP 5 MAP 6 MAP 7

Max VE value (default is 100 for NA)